Lutron PHPM-PA-120-WH Phase-Adaptive Power Module 16-Amp At 120-Volt AC Load
SKU: 27139
Description
Lutron 120V phase control input phase-adaptive output power module, White finish only
No Documents Found
Cable Size
12 AWG Copper
Dimensions
6.3 Inch Length x 2.4 Inch Width x 5.1 Inch Height
Frequency Rating
50-60 HZ
Insulation
Plastic
Input Voltage
120 VAC
Output Voltage
120 VAC
Cooling
Air
Terminal Size
Upto 12 AWG
Load Rating
16 Amp at 120 Volt AC
UOM
ea
Is Cuttable?
false
Manufacturer Part Number
PHPM-PA-120-WH
Commodity Code
74210
Enclosure
Plastic
Temperature Rating
32 to 104 deg F
RoHS Indicator
N
Special Features
Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting. May be used to switch incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Tu-Wire fluorescent dimming ballasts. Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers. Provides power and dimming for one zone. Up to 3 power modules may be wired on a single GRAFIK Eye zone. Not for use with non-dim loads. Works with 120 VAC versions of GRAFIK Eye QS and GRAFIK Eye 3000 Series control units. LP, LCP, and GP dimming panels, HomeWorks remote power panels, and Lutron 3-wire fluorescent dimmers.
Mounting
Surface or recess
Manufacturer Name
Lutron Electronics
Application
Lighting Control
Height
5.1000 INCH
Voltage Rating
120 Volt AC
Width
6.3000 INCH
Gross Weight
1.5500 POUND
Type
Power Module, phase-adaptive
Length
2.4000 INCH
Environmental Conditions
0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only.
UNSPSC
39121009
Invoice Description
PWR MOD PHASE-ADPT 120V
Standard
UL, RoHS, CSA, NOM, CIDET