GE Industrial CR463LD0AJA10A0 Electrically Held Lighting Contactor 12-Pole 30-Amp Surface Mount NEMA 1
SKU: 73485
Description
GE Industrial 12-Pole Electrically held lighting contactor has coil voltage rating of 115 - 120-Volts at 60-Hz and 110-Volts at 50-Hz. Surface mountable contactor with 12 NO - 0 NC contact configuration, has current rating of 30-Amps. It measures 7.4-Inch x 4.2-Inch x 3.9-Inch. This contactor withstands maximum load capacity of 1 hp at 110 - 120-Volts, 2 hp at 220 - 240-Volts in 1-Phase and 3 hp at 200 - 208-Volts, 5 hp at 220 - 240-Volts, 10 hp at 440 - 480-Volts, 15 hp at 550 - 600-Volts in 3-Phase.
Contactor is operated from a momentary pilot device and requires an auxiliary contact to use as a holding interlock. NEMA 1 rated contactor featuring modular design, permits fast and on-site configuration. It is suitable for use with CR460 series motor control systems. Lighting contactor is UL/cUL listed and CE certified.
Contactor is operated from a momentary pilot device and requires an auxiliary contact to use as a holding interlock. NEMA 1 rated contactor featuring modular design, permits fast and on-site configuration. It is suitable for use with CR460 series motor control systems. Lighting contactor is UL/cUL listed and CE certified.
No Documents Found
Number Of Poles
12
Dimensions
4.2 Inch Width x 3.9 Inch Depth x 7.4 Inch Height
Frequency Rating
50/60 Hz
NEMA Rating
NEMA 1
Contact Configuration
12 NO-0 NC
Coil Voltage
115-120V (50 Hz) /110V (60 Hz)
UOM
ea
Maximum Load Capacity
1-Phase: 1 hp at 110 - 120 Volt, 2 hp at 220 - 240 Volt, 3-Phase: 3 hp at 200 - 208 Volt, 5 hp at 220 - 240 Volt, 10 hp at 440 - 480 Volt, 15 hp at 550 - 600 Volt
Is Cuttable?
false
Manufacturer Part Number
CR463LD0AJA10A0
Commodity Code
41140
Amperage Rating
30 Amp
RoHS Indicator
C
Special Features
CR463L Electrically Held Contactors. 30A (2-12 pole). Standard Assembled Forms. Contact position indication—when button protrudes, contact is closed. Power poles are available as single or double poles, creating 74 different circuit combinations. Convenient side access field power wiring. Contact configuration indicator. Standard base for all pole configurations. Robust pole terminals accept up to two #8 AWG wires. Manual operator. Fast, sure three-point mounting. Enclosed contacts resist contaminants for greater reliability. Combination slotted/#2 Phillips screws. Common, easily installed power poles change from NO to NC (or vice versa) simply by unlatching and rotating 180°. Power poles rated for the range of tasks: —30A rated contacts —15A motor rated —A600 Pilot duty rated. Easy-to-read rating label. Auxiliary contacts, rated A600, are suitable for use on low level circuits down to 12V, 5mA. Plug-in auxiliary contacts are NO when installed on the left side of the base, NC on the right. Finger and back-of-hand safe power terminals. Quick-view coil voltage. Easy-change coil. Low magnetic noise results in quiet operation.
Mounting
Surface
Manufacturer Name
ABB - Electrification
IDW Item Control Number
783166620892
UNSPSC
39121529
Invoice Description
LIGHTING CONTACTOR-ENCLOSED